4 Replies Latest reply on Feb 11, 2016 10:27 AM by Carlos_A

    WGI211-AT EEPROM Flash Utility for ARM

    cvance Community Member

      Hi there,


      Working on bringing up an IMX6 Linux board and noticed I will need to program the WGI211-AT Gbe controller. It shows up in lspci as "01:00.0 Ethernet controller: Intel Corporation Device 1532 (rev 03)". According to the data sheet this ID indicates there is no firmware and the part is not pre programmed.


      I take it this is the right place to request the EEPROM flashing utility and firmware for the controller that can be used by an ARM processor?