We are using WGI210IT Ethernet controller for Ethernet application using PCIe Interface.
The WGI210IT is interfaced to i.Mx6Q through PCIe signals.
When we give the "lspci" Command in the Linux command window we are getting the following :
01:00.0 Ethernet controller: Intel Corporation Device 1531 (rev 03)
Here the Device ID 1531 refers to 0x1531 - I210 with a blank Flash (tools only, not for driver) as per the Datasheet.
We understood that we need to program the flash to identify the I210 device and we need to use some utility tool (eg: eepromARM tool ) for this.
So is it possible to share the tool for i.Mx6 (ARM based) for flash programming.
Thanks in advance.
Thank you for contacting the Intel Embedded Community.
The information that may help you is stated in the answer to the question 2.23, on page 11 of the Intel® Ethernet Controller I210/I211 Frequently Asked Questions .
We hope that this information is useful to you.