-
Re: Compile BYT-MD_RC for custom board
johndoody Mar 10, 2017 2:38 AM (in response to njm)Hi njm,
My organisation, Ircona (www.ircona.com), are a design consultancy firm who have been developing hardware and BIOS solutions for our customer for over 15 years and provide design support for companies who run into difficulties in the development or bring-up of their x86 platforms. We are also a ecosystem partner for Intel for FSP
If you would like to discuss how Ircona can assist you, please email me at john.doody@ircona.com
Thanks
John Doody
CEO
Ircona
-
Re: Compile BYT-MD_RC for custom board
Carlos_A Mar 10, 2017 9:02 AM (in response to njm)Hello njm:
Thank you for contacting Intel Embedded Community.
We suggest you address your Coreboot question to the channels listed as a reference at the Coreboot Consulting Service website.
We hope that this information is useful to you.
Best regards,
-
Re: Compile BYT-MD_RC for custom board
njm Mar 10, 2017 9:34 AM (in response to Carlos_A)My question is not about Coreboot. My question is - how compile mrc.bin from BYT-MD_RC..
-
-
Re: Compile BYT-MD_RC for custom board
njm Mar 10, 2017 10:20 AM (in response to Carlos_A)I asked support to get me some things for creating mrc.bin. They gave to me Bay Trail Framework Reference Code (FRC) and I got byt-md_rc151-v0093_44.zip where is a sources of some component.
But I haven't got any idea how buil mrc.bin or fsp.bin ( i now about different of it ).
-
Re: Compile BYT-MD_RC for custom board
AdolfoS Mar 10, 2017 4:40 PM (in response to njm)Hello njm
Both FSP and the Bay Trail Framework Reference Code are compilled using the EDKII.
The following resources can be useful for you:
https://github.com/tianocore/tianocore.github.io/wiki/Getting-Started-with-EDK-II
UEFI - About UEFI | Intel® Architecture Firmware Resource Center
Hope this information is useful for you.
Best regards,
Adolfo Sanchez
-
Re: Compile BYT-MD_RC for custom board
njm Mar 13, 2017 9:37 AM (in response to AdolfoS)I have previously read these documents. Unfortunately, being guided by them it is impossible to make a PSP. Ie the instruction is - but it is not exact.
-
-
-
-
-
-