Thank you for contacting Intel Embedded Community.
In order to be on the same page, could you please tell us if this request is related to an add-in card? Please give us all the information if it is an add-in card.
Could you please clarify us know if it is your own design? In case that it is your design, could you please let us know the sources that you use to develop it and if it has been reviewed by Intel?
Waiting for your reply to these questions.
This question is regarding a X550-BT2 controller design - not an add-in card.
This is our design and has not been reviewed by Intel.
We used the following Intel documentation:
Intel Ethernet Controller X550 Datasheet Revision 2.2 July 2017 333369-04
Intel Ethernet Controller X550 Specification Update Revision 2.3 July 2017 333717-004
X550-BT2 Reference Design 333902-004 Rev 1.9 10/05/15
X550-BT2/X540/I350-BT2 Reference Design 333900-001 Rev 1.9 10/05/15
My question is regarding source for the NVM and the tools to update it. This is not a hardware question or design specific.
Thanks for your reply.
The Intel(R) Ethernet Controller X550 [Sageville] NVM Release document # 575957 and Intel I210, I211, and X550 EEPROM Access Tool (EAT) document # 572162 may help you.
They are accessible when you are logged into your Resource & Design Center (RDC) privileged account. It can be requested by filling out the RDC Account Support form.
We hope that this information may help you.