1 Reply Latest reply on Aug 10, 2018 3:39 PM by Carlos_A

    PLEVT SATA margin test

    Frankey Community Member

      Hello,

       

      Our DQA member tries to SATA margin test on Denventon platform

       

      they used #526691(Intel Physical Layer Electrical Validation Tool Ver 1.12.7)

       

      But the Tool can't capture SATA data that like below picture.

       

      we are sure our BIOS program HSIO 16,17 and 18 to SATA. Therefore, we can run the SATA device well.

       

      Could you have any suggest?

       

      Thanks.

        • Re: PLEVT SATA margin test
          Carlos_A Brown Belt

          Hello, Frankey:

           

          Thank you for contacting Intel Embedded Community.

           

          In order to be on the same page, could you please confirm that you have followed the procedure stated in section 2.3.1, on pages 6 and 7 of the Intel(R) Physical Layer Electrical Validation Tool [Intel(R) PLEVT] User Guide document # 562291? This guide has the same document number that the tool cited in your previous message because they can be found in the same file.

           

          Please let us know the information that should answer this question.

           

          Best regards,

          Carlos_A.