2 Replies Latest reply on May 20, 2010 7:44 AM by avsys

    Need recommendations for an embedded board

    Green Belt

      I have a project that requires a Atom N270 or better type processor board with the following:


      - must run Linux

      - needs a single USB port

      - needs LVDS LCD interface

      - needs Ethernet

      - needs sata or ide interface

      - smaller than mini-itx (pico-itx?)

      - audio out is a plus but not required

      - fanless if possible but not required


      Does not need:

      - any type of expansion slots

      - power management

      - video out

      - serial/parr ports

      - wireless

      - PS/2 ports

      - I'm not locked into Atom if you have something else.


      Any companies that monitor this board that might have recommendations from

      stock or a custom board or anyone else? Searching on the web finds lots of off the shelf

      mini-itx boards but seems like I'm not having any luck finding exactly what I want.


        • Re: Need recommendations for an embedded board
          Felix_M BlackBelt

          Hi avsys:


          Welcome to the lntel® Embedded Community.


          Have you looked at the Solutions Directory for the lntel® Embedded Alliance?  Here you will find Intel-based products from over 160 companies within Intel's trusted embedded ecosystem. There are many board-level products in all of the popular form factors.   From the specifications you stated, I think there is a high probability you will find what you need.


          Find it here:  http://www.intelcommsalliance.com/kshowcase/view


          Hope this helps





            • Re: Need recommendations for an embedded board
              Green Belt

              Thanks for the link, I'll check it out.


              One of the problems I've run into searching web sites is once I find something close I

              have a difficult time gettting a response to my inquiry and answers to questions. I was

              hoping a post here would find some vendors that have what we need and would

              establish contact. Or maybe find someone else who has used a vendor that would

              offer some ideas.