1 Reply Latest reply on May 3, 2012 7:56 AM by Felix_M

    1-N450 can't get to BIOS

    Community Member
      I did the following:
      1. Connected a VGA monitor
      2. Connected a PS2 keyboard
      3. Connected a PS2 mouse
      4. Applied power
      I was expecting BIOS to show up on the monitor, but all that happened was the green LED came on on the 1-N450 board.
      The two LED digit displays are all off. I did not install a power button expecting that since it is normally open
      the board would still bring up BIOS.

      Can you give me any pointers on what else I may need to do to get this board at least to the BIOS ? I assume BIOS comes up on the VGA monitor and not through  a serial port which currently I do not have connected.